Req Number
26-125
Job Description
Salary Range: $26 – $44 per hour; OT after 8 hours in a day

About Us
At Young & Franklin Tactair we design and manufacture hydraulic and pneumatic controls, and precision, high quality valves and actuators for the aerospace and energy markets. Our 120,000 square foot facility houses R&D, Design Engineering, Assembly & Test, and an 80,000 square foot Machine Shop. We’re part of the TransDigm Group (NYSE: TDG), one of the world’s leading suppliers of highly engineered components for virtually all aerospace applications, helping us continually invest in new products and technology. We hire great people from a wide variety of backgrounds who share in our enthusiasm for innovation, design, and manufacturing excellence.

REQUIRES random drug and alcohol testing throughout the year. The drug test screens for: Marijuana, Amphetamines, Cocaine, Opiates, Phencyclidine and semi-synthetic opioids: hydrocodone, oxycodone, hydromorphone, and oxymorphone.

Position Summary
Primary focus is close tolerance manual machining of low volume parts that our over 2 dozen CNC Machines cannot finish. Fabricate tooling to support our nearly 80,000 square foot machine shop. Performs setup on and operates a variety of machining equipment including lathes, mills and grinders while working to close tolerances from complex drawings. Collaborates with colleagues to maximize productivity in the precision manufacturing of the highest quality valves & actuators for aerospace and power generation customers

Responsibilities
• Read and interpret complex blue prints, shop travelers, and operation sketches for machined and/or fabricated parts.
• Inspect parts to specifications and document results.
• Build and install fixtures.
• Report machinery, tooling or quality issues to supervisor.
• Run multiple machines as required.
• Perform additional duties as assigned.

Education and Experience
• This position requires either a US Person (as defined in applicable export regulations) or a non-US person who is eligible to obtain required export authorization.
• 5 years of experience in toolmaking or operating a variety of machining equipment to produce parts within tolerances of 5 thousandths or less.
• Ability to work from complex drawings containing GD&T and perform accurate manual inspections of parts produced.
• High School Graduate or equivalent; technical certification or degree a plus.

Physical Demands
• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

o Individuals may need to sit or stand as needed. May require frequent walking primarily on a level surface. Reaching above shoulder heights, below the waist or lifting as required to move materials throughout the workday. Proper lifting techniques required. May include lifting up to 50 pounds. May include frequent pulling, pushing, and grasping.
o The primary environment of this position is the manufacturing areas where under certain areas require the use of personal protective equipment such as safety glasses with side shields, hearing protection and proper footwear.

Interested? Please send resume to akumiega@yftactair.com.

Employment Opportunity/Affirmative Action Employer, including disabled and veterans
Full-time/Part-time
Full-time
Area of Interest
Machine Shop

Machinist (Manual & CNC) – The IDEAL Pump
📍 Stuttgart, Arkansas

About Us

The IDEAL Pump is a trusted provider of high-quality pump systems and repair services, serving agricultural, industrial, and commercial clients. We take pride in precision workmanship and dependable service.

Position Summary

The IDEAL Pump is seeking a skilled Machinist with experience in both manual and CNC machining to support the repair, rebuilding, and manufacturing of pump components. This role requires attention to detail, strong mechanical aptitude, and the ability to work independently in a shop environment.

Key Responsibilities

• Set up and operate manual lathes, mills, and drill presses
• Program, set up, and operate CNC machines (lathe and/or mill)
• Machine pump components such as shafts, sleeves, bushings, and housings
• Read and interpret blueprints, schematics, and technical drawings
• Perform precision measurements using micrometers, calipers, and gauges
• Repair and recondition worn or damaged pump parts
• Maintain tight tolerances and ensure quality standards are met
• Assist with disassembly and reassembly of pumps as needed
• Perform routine machine maintenance and keep work area organized
• Follow all safety procedures and shop best practices

Qualifications

• 3+ years of machining experience (manual and/or CNC)
• Strong understanding of machining processes and tooling
• Experience with pump repair or rotating equipment (preferred)
• Ability to read blueprints and work to precise tolerances
• Familiarity with CNC programming (G-code or conversational) is a plus
• Mechanical aptitude and problem-solving skills
• Ability to lift 50 lbs and stand for extended periods

Preferred Skills

• Experience machining stainless steel, cast iron, and alloys
• Knowledge of shaft repair, sleeving, and fitting
• Welding or fabrication experience (a plus)

Compensation & Benefits

• Competitive pay based on experience
• Overtime opportunities
• Stable, full-time position in a growing company

Why Join The IDEAL Pump?

Work with a team that values craftsmanship, precision, and reliability. The IDEAL Pump offers a hands-on environment where your machining skills directly impact quality and performance.
Are you an experienced machinist looking to take your career to the next level? Email your resume to –

– carissa.lock@theidealpump.com.

Manual Machinist
Pay: $25.00 – $35.00 per hour (based on experience)
Company: Great Plains Technical Services
Job Type: Full-time

Position Overview
Great Plains Technical Services is seeking an experienced Manual Machinist to support electric motor repair operations. This role focuses on precision machining of AC and DC electric motors and components, with additional repair and restoration work. The ideal candidate takes pride in accuracy, craftsmanship, and working to exact specifications.

Responsibilities

• Perform manual machining on AC and DC electric motors and related components
• Machine parts to specification using lathes and milling equipment
• Undercut armatures and perform precision component restoration
• Sleeve components and perform shaft repairs
• Conduct cold spray / build-up repairs on motor shafts
• Read and interpret blueprints, drawings, and specifications
• Inspect and measure parts using precision measuring tools
• Maintain a clean, safe, and organized work area
• Welding and fabrication support as needed (a plus)

Qualifications

• Proven experience as a manual machinist
• Strong knowledge of manual lathes and milling machines
• Experience working with motor components, shafts, and armatures preferred
• Ability to machine to tight tolerances
• Welding experience is a plus but not required
• Detail-oriented with strong problem-solving skills

Compensation & Benefits

• Competitive hourly pay: $25.00 – $35.00, depending on experience
• 401(k) with company matching
• Health, dental, and vision insurance
• Flexible spending account (FSA)
• Paid time off
• Bonus opportunities

Work Schedule
• 8-hour or 12-hour shifts available
• Monday through Friday
• Weekends as needed

Interested? Please forward resume with cover letter to – gpts@gptsinc.com.