Winder Job Description

Job Duties

• Inspect various kinds of equipment for damage and evidence of electrical or mechanical failure and will be able to relay and explain their observations to the lead winder or shop manager.
• Will be able to perform the company specified electrical tests and core loss tests outlined by the company with assistance from the lead winder or shop manager as needed.
• Illustrate and/or document all relevant data specific to the unit’s characteristics. To include all pertinent existing coil, wedge, filler and physical winding dimensions which will be detailed on company data sheets, with assistance from the lead winder or shop manager as needed. Will also include identifying and diagraming the as found winding connection data with assistance from the lead winder or shop manager as needed. These operations will apply to form coil and random coil windings.
• Dismantle and/or strip damaged and burned out windings.
• Prepare all reusable parts for rewind and inspect renewed parts for hidden, structural damage or unusual conditions.
• Will be able to insert form and random wound coils into the rotor or stator core. Will be able to layout and braze the winding connections. Both operations will be performed with limited assistance by the lead winder.
• Will be able to identify and apply proper insulating techniques and/or requirements during rewinding with assistance from the lead winder as needed.
• Test rewound equipment according to standards and document test results.
• Complete required paperwork for each job accurately and on a timely basis.
• Operate specialized repair and testing equipment.

Experience:

• Mechanical Knowledge: 2 years (Required)
• Winding Repair: 1 year (Preferred)

Physical Requirements:

• Must be able to squat, kneel and crawl to service equipment from below – Up to 20% of your shift
• Must be able to bend and twist with torque to service equipment and to reach into awkward areas– Up to 30% of your shift
• Must be able to climb stairs, ladders and or steps to get up onto equipment– Up to 5% of your shift
• Must be able to work below, at, and above shoulder level to maintain equipment– Up to 90% of your shift
• Required to push, pull reach and grasp with hands to use hand tools– Up to 50% of your shift
• Must be able to lift 30-50 pounds individually or up to 100 lbs in a two man lift– Up to 50% of your shift
• Must be able to stand while working on equipment – Up to 90% of your shift
• Must be able to manipulate small/delicate parts with hands – Up to 5% of your shift

Salary and Benefits

Salary based on experience.

Retirement options, Health insurance, PTO, Paid vacation, Paid holidays, fun work environment, etc.

Interested? Please forward resume to – Marc@Aimpower.com

#Electricmotormechanicjobs

Lead Electro-Mechanical Technician
Job Type: First Shift Full Time
Pay Type: Hourly Overtime Available
Location: Romeoville
Experience: 2+ Years
Benefits: 401K Plan, Disability, Health, Holiday Pay, Life Insurance, PTO, Vision

Apex is currently looking for our next top-level service tech to join our team!

Job Overview

• Repair various kinds of electro-mechanical equipment – including but not limited to AC/DC Motors, Pumps and Gearboxes
• Read job cards to determine job status, work authorization/limitations, estimates, description of problems and expected service ability
• Test electro-mechanical equipment to troubleshoot known or suspected problems using various methods and special testing equipment
• Disassemble electro-mechanical equipment noting parts identification, configuration and condition
• Clean electro-mechanical equipment assemblies as needed using various methods and steps, including but not limited to parts washers/steamers
• Correctly requisition needed items from purchasing department
• Replace or repair worn or defective mechanical or electro-mechanical assemblies – including but not limited to bearings, brushes, brush holders, motor leads, gears, seals, impellers, mechanic switches, brakes and clutches
• Retest reassembled electro-mechanical equipment for proper output and operations. Complete required paperwork for each job accurately and on a timely basis
• Operations specialized repair and testing equipment and other equipment as needed
• Observe all safety procedures and use proper protective gear
• Lift, tighten, adjust and secure heavy objects in order to perform work duties
• Must be dependable and prompt

Qualifications

• Must have 2-5 years of Electrical Mechanical Experience or Applied Education
• Winding Experience a Plus
• Strong mechanical troubleshooting skills
• In-depth mechanical knowledge
• Proficiency in using an ohmmeter
• Ability to diagnose and repair various mechanical systems
• Experience with electrical components and systems
• Familiarity with safety protocols in repair environments
• Attention to detail and problem-solving abilities

Interested? Please forward resume to – careers@apexindustrialautomation.com.

#electromechanicaljobs