Job Title: Experienced Field Service Generator Technician
Company: Mario Power Generator Service
Location: Kenilworth, NJ (Servicing New Jersey & Regional Tri-State Area)
Employment Type: Full-Time | Union Position
Compensation: $41.00/hour base wage (negotiable based on experience) + Overtime & Union Benefits

Company Overview
Mario Power Generator Service, located in Kenilworth, New Jersey, is a premier service provider specializing in comprehensive standby power solutions for commercial, industrial, and municipal clients. With deep technical expertise in high-capacity power systems, field diagnostics, switchgear, and control retrofits, we deliver rapid emergency response, preventive maintenance, and complex electrical engineering upgrades across New Jersey.

Position Summary
We are seeking a highly skilled, safety-focused Field Service Generator Technician with a strong heavy diesel engine background and advanced electrical troubleshooting capabilities to join our Union team. Working out of our Kenilworth facility, you will perform field maintenance, troubleshooting, load bank testing, fuel system servicing, and system commissioning on natural gas and diesel generators ranging from 25 kW up to 3.5 MW, operating across low and medium voltage distribution systems (480V, 4,160V, and 13.2 kV).
Direct experience performing digital generator controller upgrades and retrofits is strictly required for this position. This is a union shop position subject to a standard 90-day probationary period.

Key Responsibilities
• Field Diagnostics & Repairs: Perform advanced mechanical and electrical troubleshooting, maintenance, and emergency repairs on natural gas and heavy diesel generator packages (25 kW to 3.5 MW). Perform temp generator (rental tie ins) installs.
• Controller Upgrades & Retrofits: Install, wire, program, and commission modern digital generator control panels (e.g., Deep Sea, ComAp, Basler, Woodward) on legacy standby units.
• Low & Medium Voltage Service: Safely service, test, and troubleshoot power systems operating at 480V, 4,160V (4.16 kV), and 13.2 kV levels.
• Transfer Switches & Switchgear: Inspect, repair, and test Automatic Transfer Switches (ATS), main circuit breakers, and automatic paralleling controls.
• Load Bank & Fuel Maintenance: Execute resistive/reactive load bank testing, fuel tank maintenance, fuel polishing oversight, and fluid analysis.
• Emergency Field Response: Participate in on-call service rotations to respond to emergency outages and severe storm events across New Jersey.

Minimum Qualifications & Requirements
• Experience: Proven field service background in power generation with demonstrated heavy diesel engine diagnostic expertise.
• Technical Proficiency: Must have own tools up to 1.5 inch drive.
o Mandatory experience performing digital generator controller upgrades and re-wiring.
o Strong mastery of low and medium voltage AC/DC electrical principles (480V, 4,160V, 13.2 kV).
o Proficient using diagnostic software, megohmmeters, digital multimeters, phase rotation meters, and load bank equipment.
o Hands-on experience with ATS units, diesel fuel delivery systems, and fuel tank maintenance.
• Pre-Employment Screening & Licensing:
o Must successfully pass a pre-employment drug and alcohol screening.
o Must pass a DOT physical examination and maintain a valid driver’s license with a clean driving record.
• Terms: Successful completion of a 90-day probationary period.

Compensation & Union Benefits
• Base Rate: $41.00/hour base pay (commensurate with trade experience and certifications).
• Union shop representation offering union health, welfare, and pension benefits.
• Overtime pay for emergency call-outs, weekends, and hours beyond standard shifts.
• Paid holidays, accrued vacation, other benefits,
• Fully equipped company field service vehicle, fuel card, specialized tooling, and uniforms.
• 90-day probation period with clear progression to full union seniority.

Interested? Please forward resume to office@mariopowergen.com.

Company: Jarvis Electric Motors Inc.

Location: 6001 S Crescent Boulevard, Pennsauken, NJ 08110 (Servicing South Jersey & Philadelphia Metro Area)

Employment Type: Full-Time

Compensation: Competitive salary and benefits package based on experience

Company Overview
Established in 1946, Jarvis Electric Motors Inc. is a premier electric motor repair, sales, and service shop located in Pennsauken, New Jersey. Just minutes from the Ben Franklin Bridge and Center City Philadelphia, we provide electro-mechanical solutions to school districts, hospitals, manufacturers, mechanical contractors, and residential clients throughout South Jersey and the Delaware Valley. We specialize in the repair, rewinding, and overhauling of AC/DC electric motors, industrial pumps, gear reducers, blowers, hoists, and power tools.

Position Summary
We are seeking an experienced In-Shop Electric Motor & Equipment Mechanic to join our team in Pennsauken, NJ. Working directly within our fully equipped repair shop, you will perform teardown, diagnosis, precision mechanical rebuilding, and testing on a wide range of AC/DC electric motors (up to 250HP), commercial/residential pumps, gear reducers, and industrial power tools. The ideal candidate brings strong diagnostic abilities, electro-mechanical proficiency, and pride in quality craftsmanship.

Key Responsibilities
• In-Shop Teardown & Diagnosis: Disassemble AC/DC electric motors, submersible/sump pumps, blowers, gear drives, and power tools to identify electrical failures or mechanical wear.

• Mechanical & Electrical Rebuilding: Replace bearings, mechanical seals, brushes, armatures, bushings, shafts, and end bells. Perform mechanical fit restoration and precision alignments.

• Bench Testing & Electrical Diagnostics: Conduct surge testing, insulation resistance (megger) tests, winding resistance checks, and no-load run testing using electrical diagnostic panels and multimeters.

• Equipment Assembly: Reassemble electric equipment to manufacturer specifications, ensuring proper tolerances, balance, and operational integrity prior to final inspection.

• Machining & Shop Tool Operation: Safely operate shop equipment including hydraulic presses, bearing heaters, lathes, drill presses, overhead cranes, and hand/power tools.

• Quality Assurance: Maintain clean work areas, document work performed on repair orders, and ensure all completed equipment meets shop performance standards.

Minimum Qualifications & Skills
• Experience: 3+ years of hands-on experience in an electric motor, pump, or electro-mechanical repair shop.

• Technical Skills:

o Demonstrated proficiency repairing AC motors (up to 250HP) and DC electric motors.

o Working knowledge of centrifugal, submersible, sump, and HVAC circulating pump repairs.

o Experience troubleshooting and repairing electric power tools, gear reducers, and hoists.

o Ability to read precision measuring instruments (micrometers, calipers, dial indicators) and electrical schematics.

• Physical Requirements: Ability to lift up to 50 lbs, maneuver heavy equipment using shop hoists/cranes, and work standing in a shop environment.

• Work Ethic: Reliable, detail-oriented, and focused on delivering high-quality repairs with minimal comebacks.

Compensation & Benefits
• Competitive base pay negotiable based on experience and electro-mechanical skill level.

• Comprehensive health, dental, and vision insurance coverage options.

• Paid Time Off (PTO) and paid holiday schedule.

• Retirement plan options.

• Steady, year-round indoor shop work with predictable schedule (Monday–Friday).

Interested? Please forward resume to jarvis662@verizon.net.

Job Title: Experienced Field Service Generator Technician

Company: Automated Generator Systems

Location: Benton Ridge, OH (Servicing Northwest Ohio)

Employment Type: Full-Time

Compensation: Salary negotiable based on experience

Company Overview
Automated Generator Systems, located in Benton Ridge, OH, is a trusted provider of residential, commercial, and agricultural backup power solutions across Northwest Ohio. Specializing in sales, installation, maintenance, and emergency repair, we keep local homes, farms, and businesses powered when it matters most.

Position Summary
We are seeking an experienced Field Service Generator Technician with a minimum of 4 years of hands-on Generac experience to join our field service team. In this role, you will perform on-site troubleshooting, routine preventative maintenance, warranty repairs, and start-up commissioning for Generac gaseous and diesel standby generator systems and automatic transfer switches (ATS) throughout Northwest Ohio.

Key Responsibilities
• Generac Diagnostics & Repair: Perform complex mechanical and electrical troubleshooting, maintenance, and warranty repair on Generac air-cooled and liquid-cooled standby power systems.

• Preventative Maintenance: Conduct multi-point field inspections, oil/filter changes, battery load testing, and system checkups on residential, commercial, and agricultural units.

• Transfer Switch & Electrical Service: Inspect, repair, and wire Generac Automatic Transfer Switches (ATS), digital controllers, voltage regulators, and utility sensing circuits.

• Emergency Response & On-Call: Participate in a scheduled on-call rotation to deliver rapid emergency service during severe weather and power outages.

• Customer Service & Reporting: Communicate repair findings and maintenance recommendations clearly to clients while completing digital field service reports accurately.

Minimum Qualifications & Requirements
• Experience: 4+ years of dedicated, hands-on field experience servicing and repairing Generac generator systems.

• Technical Skills:

o In-depth mastery of Generac control panels (Evolution, Nexus, etc.), engine mechanics, and ATS functionality.

o Proficient using digital multimeters, insulation testers, and Generac diagnostic software.

o Strong understanding of AC/DC electrical schematics and power distribution.

• Certifications: Generac Air-Cooled / Liquid-Cooled Factory Certification strongly preferred.

• Licensing: Valid driver’s license with a clean, insurable driving record.

• Physical Demands: Ability to lift up to 70 lbs and work outdoors in varying weather conditions.

Compensation & Benefits
• Competitive salary commensurate with Generac certifications and field experience.

• Overtime and emergency call-out pay incentives.

• Company service vehicle, fuel card, and specialized diagnostic equipment provided.

• Paid Time Off (PTO) and paid holiday schedule.

• Health and retirement benefit options.

• Ongoing Generac factory recertification and technical training.

Interested? Please forward resume to –   wacrist@hotmail.com.

Job Title: In-Shop Generator Technician

Company: Hamilton Electric (hamiltonelec.com)

Location: 3175 Pierce Rd, Saginaw, MI 48604 (Serving Mid-Michigan & the Tri-Cities Area)

Employment Type: Full-Time

Compensation: Competitive salary based on experience + benefits package

Company Overview
Established in 1974, Hamilton Electric is a family-owned electro-mechanical sales and repair facility located in Saginaw, Michigan. We specialize in the complete overhaul, repair, dynamic balancing, and testing of AC/DC electric motors, industrial pumps, engine-driven generators, welder-generators, and variable frequency drives (VFDs). For over 50 years, our fully equipped Saginaw shop has provided top-tier industrial repair services to manufacturing plants, agricultural facilities, contractors, and commercial clients throughout Mid-Michigan.

Position Summary
We are seeking an experienced In-Shop Generator Technician to perform diagnostic testing, teardown, repair, and bench testing on engine-driven generators, industrial generator ends (alternators), portable power units, and engine-driven welders in our Saginaw facility. This indoor, shop-based role focuses on electro-mechanical overhaul, electrical diagnostics, component rebuilding, and load testing in a controlled shop environment without the demand for daily field travel.

Key Responsibilities
• In-Shop Teardown & Diagnosis: Disassemble generator sets, alternators, exciters, and engine-driven welders (e.g., Lincoln, Miller, Generac, Kohler, Cummins) to isolate electrical or mechanical failures.

• Electrical Component Repair: Test, troubleshoot, and replace automatic voltage regulators (AVRs), rotating diodes, rectifier blocks, exciters, stator/rotor windings, slip rings, and brush assemblies.

• Engine & Mechanical Servicing: Perform basic engine diagnostics, governor adjustments, mechanical seal replacements, bearing fittings, and shaft alignment on shop-delivered generator packages.

• Bench & Load Testing: Execute no-load run testing, insulation resistance (megger) tests, surge testing, and resistive load bank testing using shop test panels to ensure equipment meets OEM specifications before customer delivery.

• Cross-Functional Shop Collaboration: Work alongside our electric motor mechanics and machinists to coordinate dynamic balancing, shaft turning, or housing sleeve repairs.

• Quality & Documentation: Document initial inspection findings, required parts lists, and final test parameters on repair work orders.

Minimum Qualifications & Requirements
• Experience: 6+ years of experience servicing, repairing, and rebuilding generator ends, engine-driven generators, or welder-generators in a shop or bench environment.

• Technical Skills:

o Solid understanding of AC/DC electrical theory, rotating electrical machinery, and generator excitation systems.

o Proficiency with diagnostic tools, including digital multimeters, megohmmeters, insulation testers, and load banks.

o Ability to read electrical schematics, control wiring diagrams, and equipment exploded-view manuals.

o Basic mechanical tool skills for engine teardown, precision measurement, and bearing installation.

• Physical Demands: Ability to lift up to 50 lbs, operate overhead shop bridge cranes/hoists, and stand for extended periods on the shop floor.

• Attributes: Strong troubleshooting mindset, attention to detail, and pride in quality craftsmanship.

Compensation & Benefits
• Competitive base salary commensurate with years of experience and diagnostic skill level.

• Steady, year-round indoor schedule (Monday through Friday) with reliable shop hours.

• Paid Time Off (PTO) and paid holiday schedule.

• Health, dental, and retirement plan options.

• Support for skill development and cross-training across electric motor and pump mechanics.

Interested? Please forward resume to – adam@hamiltonelec.com.

Zaskoda Repair — Caldwell, Texas

Zaskoda Repair is seeking an experienced Generator Technician to join our team serving customers in Caldwell and the surrounding College Station, Texas area. This position is ideal for a hands-on technician with at least 4 years of generator service and repair experience who is comfortable working in the field on residential, commercial, industrial, and municipal generator systems.

Position Overview
The Generator Technician will perform scheduled maintenance, troubleshooting, diagnostics, service, and repair calls on generator systems. Our work is primarily focused on Kohler and Generac generators up to 100 kW, along with municipal generator units up to approximately 250 kW.

Technicians will spend significant time in the field responding to customer service and repair calls, performing preventative maintenance, identifying mechanical and electrical problems, and getting generator systems back into reliable operating condition.
Cummins Onan experience is a strong plus.

Key Responsibilities
• Diagnose, service, maintain, and repair generator systems.
• Primarily work on Kohler and Generac generators up to 100 kW.
• Service and repair municipal generator systems up to 250 kW.
• Respond to field service and repair calls throughout the service area.
• Perform routine preventative maintenance.
• Change engine oil and oil filters.
• Replace air, fuel, and other service filters as required.
• Inspect generator engines, electrical systems, controls, batteries, and related components.
• Run and test generators following maintenance and repairs.
• Troubleshoot starting, charging, electrical, mechanical, and operational problems.
• Complete service calls professionally and document work performed.
• Communicate with customers regarding equipment condition and recommended repairs.
• Maintain a safe, organized service vehicle and work environment.

Qualifications
• Minimum 4 years of generator technician/service experience.
• Hands-on experience servicing and troubleshooting generators.
• Kohler and/or Generac experience strongly preferred.
• Cummins Onan experience is a major plus.
• Ability to troubleshoot both mechanical and electrical problems.
• Comfortable working independently in the field.
• Strong customer-service and communication skills.
• Ability to work safely around energized electrical equipment and running engines.
• Valid driver’s license and acceptable driving record.

Authorized Repair Center

Zaskoda Repair is an authorized repair center for Lincoln, Miller, Hobart, SanRex, Kohler, Fronius, Generac, Hypertherm, and ESAB, providing technicians with exposure to a broad range of professional welding, power-generation, and industrial equipment.

Compensation & Benefits

Salary based on experience and qualifications.

Benefits include:
• Health insurance
• Life insurance
• Paid time off (PTO)
• Vacation
• Sick leave
• Field-service opportunities
• Stable work with an established repair operation

Apply Today

If you are an experienced Generator Technician looking for a hands-on field-service position near College Station/Caldwell, Texas, Zaskoda Repair would like to hear from you – tim.zaskodarepair@gmail.com.

Generator Technician • Kohler • Generac • Cummins Onan • Field Service • Generator Repair • Preventative Maintenance • Municipal Generators

Job Title: In-House Electric Motor Mechanic / Technician
Company: Heights Armature Works
Location: 12250 Taylor Road, Houston, TX 77041
Job Type: Full-time (In-Shop)

Compensation: Salary based on experience

About Us
Established in 1932, Heights Armature Works is an EASA-Certified Service Center providing premier AC/DC motor, generator, and industrial pump repairs across Greater Houston. Operating out of our 12,000 sq. ft. facility, we are seeking a skilled Electric Motor Mechanic with at least 5 years of hands-on experience to handle shop repairs and rebuilds.

Key Responsibilities

• Inspect, diagnose, repair, overhaul, and test AC and DC electric motors up to 600 HP, including standard NEMA frame configurations.

• Disassemble rotating equipment, evaluate mechanical/electrical wear, measure tolerances with precision tools (micrometers, calipers, dial indicators), and log initial fault findings.

• Perform mechanical repairs including mechanical assembly, bearing replacement, shaft fitting, housing restoration, and dynamic balancing.

• Conduct electrical diagnostics, insulation resistance (Megger), surge testing, stator/armature resistance checks, and mechanical run-testing prior to final sign-off.

• Perform preventative maintenance, reconditioning, dip-and-bake insulation procedures, and complete teardown-to-assembly installations in-house.

Qualifications & Requirements

• Experience: Minimum 5 years of proven experience repairing AC/DC motors, NEMA frame equipment, and industrial rotating machinery in a motor shop environment.

• Technical Knowledge: Strong understanding of motor mechanical components, bearings, armatures, commutators, and electro-mechanical testing equipment.

• Physical Capability: Ability to safely operate overhead shop cranes (up to 15,000 lbs capacity), rigging gear, and heavy repair machinery.

• Work Ethic: Detail-oriented focus on safety, OEM standards, and quality craftsmanship.

Benefits & Compensation

• Competitive base salary commensurate with experience.

• Comprehensive health insurance plan.

• Company-matched retirement plan.

• Paid Time Off (PTO) and paid annual vacation days.

How to Apply
Qualified candidates are invited to submit their resume or stop by our Houston facility at 12250 Taylor Road. You may also reach out directly via phone at (713) 937-7676 or email bwilliams@hawtx.com.

Job Title: Generator Service Technician
Company: C&A Generator Service LLC
Location: Higganum, CT

Employment Type: Full-time
Compensation: Salary commensurate with experience

Job Overview
C&A Generator Service LLC is seeking an experienced Generator Service Technician with 4 to 5 years of hands-on experience in power generation. This role covers preventive maintenance, load bank testing, diagnostic repair, and installation across residential homeowner units (15–20 kW) up to large commercial and industrial systems (up to 1.5 MW V12 generators).

Key Responsibilities

• Perform routine preventive maintenance, inspections, and load testing on emergency standby and prime power systems.

• Install, commission, and connect residential (15–20 kW) and commercial/industrial (up to 1.5 MW) power generation units.

• Troubleshoot and repair electrical, electronic, fuel, and mechanical components on gas and diesel engines up to large-displacement V12 configurations.

• Perform automatic transfer switch (ATS) testing, wiring, and system diagnostics.

• Respond to service calls, complete field work orders, and communicate service findings directly with residential and commercial clients.

Required Qualifications & Experience

• Experience: 5 years of proven field experience working on standby generator systems and industrial engines.

• Brand Knowledge: Familiarity with major power equipment manufacturers, including Cummins, Kohler, HiPower, Waukesha generators, MTU, and Detroit Diesel.

• Technical Skills: Strong understanding of diesel and gaseous engines, AC/DC electrical systems, automatic transfer switches, and digital controller panels.

• License & Credentials: Valid driver’s license with a clean driving record; electrical licenses or manufacturer certifications (Cummins, Kohler, EGSA) are a strong plus. CDL A preferably.

• Physical Requirements: Ability to lift up to 50+ lbs, work outdoors in varying weather conditions, and participate in an on-call rotation for emergency power outages.

How to Apply
Interested applicants can submit their resume and service history to Ashaw@sseps.us or call (860) 575-4323.

Electrical Motor Repair Technician Job Opening:

We are a premier ISO9001:2015 CERTIFIED industrial repair and manufacturing facility. Our nation- wide customer base includes power generation, industrial manufacturing including heavy steel manufacturing, municipal and processing facilities. We offer competitive wages and benefits (Full benefit package Medical, Dental, 401K, paid vacation, and a great working environment). Overtime is available.

We are currently seeking to fill the following position: Electrical Motor Repair Technician

· Receive and interpret oral/written instructions from supervisor(s) and/or assigned personnel.

· Test electromechanical equipment to troubleshoot known or suspected problems using various methods (AC or DC).

· Disassemble and assemble electromechanical equipment noting parts identification, configuration, and condition.

· Clean electromechanical equipment assemblies as needed using various methods and steps, including but not limited to: parts washers, steamers, blasters, etc.

· Measure and inspect the parts per provided instructions and fill out proper data sheets.

· Replace or repair worn or defective mechanical or electromechanical assemblies, including but not limited to: bearings, brushes, brush holders, motor leads, gears, seals, impellers, mechanical switches, rotors, tachs, fans, end shields, etc. per provided instruction.

· Engage in retesting reassembled electromechanical equipment for proper output and operation.

· Maintain a neat and orderly work area.

· Abide by all safety/environmental regulations and use proper protective gear.

· May be assigned to field to support service work as required.

· Perform other skilled or non-skilled duties as directed by supervisor

Qualifications:

· Minimum of a High School Diploma or GED

· 2+ years of relevant electrical experience

· Good written and oral communication skills

· Self-motivated

· Ability to multi-task

· Organized and detail oriented

· Valid driver’s license required

Physical Requirements:

· Able to stand, walk, reach with hands/arms, stoop, kneel, crouch for most of the day

· Frequently lift and/or move up to 50 pounds.

· Regularly lift and/or move up to 25 pounds,

· Occasionally lift and/or move more than 100 pounds.

· Have ability for close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Desirable:

· Familiarity with computer.

· Ability to perform welding, soldering & brazing.

· Balance rotating equipment.

Pay range: Commensurate with experience, from $30-$45 per hour

Overtime:  We pay overtime for hours worked over 8 per day and any Saturday work; double time for Sunday work

Shift:  6:30am-5:00pm Monday-Saturday; some Sundays.  We guarantee 40 hours per week; overtime is currently available.

Relocation package may be considered.

INDIVIDUALS MUST HAVE EXPERIENCE WORKING WITH LARGE ELECTRIC MOTORS  

Interested? Please forward resume to – tfries@msc-hobart.com.

SERVICE TECHNICIAN

Comp-Air Ohio is a well established Gardner Denver air compressor distributor that has been providing quality equipment and service to Northern Ohio for the past 49 years. We distribute a complete line of energy saving compressors, dryers and ancillary equipment. We are looking to fill a need for field service on all of our product lines.

Description
• On-site maintenance and repairs of all brands of compressors
• Refrigerated and desiccant dryer repair and maintenance
• Installation of new equipment and plant air piping

Requirements
• 3-5 years experience with industrial compressors or related equipment
• Strong electrical control troubleshooting and repair abilities
• Refrigeration recovery certificate
• General knowledge of pneumatic and hydraulic controls
• Standard set of tools and electrical meters
• Customer service attitude

Must have a clean driving record and pass a hair follicle drug test. Ability to travel and work evenings / weekends as required.  Pay range of $30-$45/hr depending on skill level.

Comp-Air Ohio will provide competitive wages with benefits, paid vacations, company truck and uniforms. Interested? Please forward resume to mark@comp-airohio.com.

Cleveland Mechanic
As a leader in the industrial/commercial floor cleaning and preparation, Jordan Power Cleaning Equipment has been serving Ohio for over 42 years in our four branch locations. We are seeking a dependable, ambitious, willing to learn Mechanic to join our family of service professionals, working in the Tallmadge, Ohio area.

As a Mechanic, your duties will include:
· Service and maintenance of customer equipment, both in shop and at customer locations.
· Repair, inspect and maintain rental equipment.
· Perform safety inspections on company vehicles.
· Search parts and create estimates.
· Load and deliver company product to customers.
· Instruct customers on how to operate equipment.
· Instruct customer on safety and maintenance of equipment.
· Effective communication with Branch Managers.

Why Jordan Power Cleaning Equipment?
· We have been a growing company since 1977, and we are still growing.
· We are a family value-based company with great employees.
· We represent the top equipment manufacturers in the cleaning and floor preparation industry.
· Reasonable 40-hour work week and no weekends.
· We have many long-term employees that thoroughly enjoy their jobs.

Compensation and Benefits:
· $20.00-$26.00 an hour based on experience.
· Tool Allowance.
· Company provided uniforms.
· 40-hour work week and no weekends.
· 12 Paid Holidays for Christmas, New Years, Good Friday, Memorial Day, Independence Day, Labor Day, and Thanksgiving.
· Company sponsored Holiday Events.
· Paid Vacation/PTO equal to 2 weeks after 1-year anniversary.
· Life Insurance (Company Paid) $15,000 Policy.
· Company Matched 401(k).
· Health Benefits
o Medical (Summa)
o Dental (Humana)
o Vision (EyeMed)
o Deductible Assistance Program

The right candidate will have:

· At least 2 years of mechanical experience
· Valid driver license
· Ability to pass pre-employment background check and drug screening.
· Positive attitude and great work ethic.
· Strong verbal and presentation skills.
· Professional appearance.
· Basic tools to complete jobs.

Job Type: Full-time

Benefits:
• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:
• 8 hour shift
• Day shift
• Monday to Friday

Experience:
• Equipment repair: 4 years (Preferred)

License/Certification:
• Driver’s License (Required)

Ability to Commute:
• Cleveland, OH 44278 (Required)

Work Location: In person

Interesting? Please forward resume to – dpowell@jordanpower.com.