Job Title: Lead Mechanic Date: October 2026

Who We Are

The Sidewinders Motor Services Division is a full-service electric motor repair and rebuild shop in Magna, Utah. Founded in 1995 and acquired by Sidewinders in 2019, the shop is still family owned and operated. It has grown into a key part of Sidewinders’ service offering. We disassemble, test, repair, rewind and rebuild AC/DC motors, generators and other rotating equipment to EASA AR100 and ISO 9001 standards. Our customers come from mining, heavy equipment, industrial distribution, aerospace/defense and power generation, including GE, Motion Industries, Rio Tinto, Komatsu and Northrop Grumman.

Across Sidewinders, we put safety, quality and performance first, in that order, on every job without exception. We build long-lasting customer relationships by getting the work right the first time.

Learn more about Sidewinders here: https://www.sidewindersllc.com/about-us/

The Opportunity

We are looking to add a Lead Mechanic to our Motor Shop team. Reporting to our Motor Shop Assistant Manager, you will be responsible for the day-to-day motor shop floor. This is a working lead role: the majority of your role will be hands-on repair work, and the other part will be leading the team by answering questions, directing daily tasks, and helping our mechanics get jobs done right the first time. Our ideal candidate is a skilled motor mechanic who enjoys sharing knowledge, communicates clearly, and keeps safety and quality at the center of every job.

Your day-to-day may include:

● Disassemble, inspect, repair and reassemble AC/DC electric motors, generators and other rotating equipment.
● Perform and record electrical testing, including, but not limited to insulation resistance, winding resistance, Hi-Pot and surge comparison.
● Take and record accurate mechanical measurements; replace bearings and seals etc.
● Perform dynamic balancing, alignment and final no-load run testing.
● Lead the day-to-day motor shop floor and direct daily job assignments in coordination with the Assistant Manager.
● Serve as the go-to resource for technical questions from team members.
● Train and mentor mechanics and apprentices on procedures, with safety and quality first.
● Review work at key stages to ensure standards are met consistently (EASA AR100, ISO 9001).
● Prioritize safety, ensuring compliance with safety standards, lockout/tagout and proper use of PPE.
● Maintain and promote an organized, clean and safe workspace/shop floor.
● Review job documentation and test data for accuracy and completeness as work progresses.
● Operate machinery, equipment, cranes and forklifts as necessary.
● Communicate schedule, parts or equipment needs to the Assistant Manager promptly.
● Perform other duties as assigned.

Shift: Days, 7:30 a.m. – 4:00 p.m.
Overtime: Hourly, overtime eligible. Anticipate weekly overtime, including weekend work
Reports To: Motor Shop Assistant Manager
Pay Rate: $30.00 – $40.00 per hour starting rates depending on experience
Location: Magna, UT (Main Street)
Travel: Periodic daytrips to local client on-sites will be required. Must also have ability to travel out of state for occasional overnight client on-sites. Expenses are covered through company bookings and per diems (we don’t expect you to be out of pocket for travel).
Tools: Company provided with option to use own if preferred (reimbursed if damaged).
Experience & Skills
Your initial pay rate will be based on your relevant experience and demonstrated capabilities.

Required:
● Minimum 8 years of proven hands-on experience as a mechanic in a motor shop or rotating equipment environment.
● Minimum of 3 years of prior lead or senior mechanic experience.
● Background in trades such as Electric Motor Mechanic/Fitter/Winder.
● Proven ability to diagnose, repair and test AC/DC electric motors.
● Competent in performing root cause analysis (RCA).
● Strong knowledge and practice of AC/DC electrical testing equipment:
o Insulation resistance (Megger)
o Winding resistance
o Hi-Pot and surge comparison (Baker)
o Multimeter
● Competent in measuring and recording accurate mechanical measurements:
o Dial Indicators
o Micrometers
o Calipers
o Vibration analyzers / accelerometers
● Advanced knowledge of hand and power tools.
● Ability to speak, read & write in English and perform basic math.
● Ability to work independently and as part of a team in a fast-paced environment.
● Willingness and ability to train others on procedures – safety & quality must be #1
● Patient, clear communicator who is comfortable answering questions and supporting team members.

Desired:
● Experience diagnosing and repairing other rotating equipment such as fans, pumps, gearboxes and generators.
● Experience working with high voltage equipment/rewinds.
● Experience operating within and contributing to ISO 9001 environments.
● Customer job site/field service experience.

● Working computer skills using Apple products and Google Workspace.
● Experience utilizing service center software; MotorBase experience is a plus.

Physical / Environmental Requirements
• Able to work in adverse conditions (indoor/outdoor)
• Able to work in physically demanding environment and lift 25 lbs. frequently and occasionally up to 50 lbs.
• Able to continuously perform basic physical movements such as bending, twisting, squatting, kneeling, reaching, grabbing

Other Requirements
To comply with various regulations that govern our clients, the following requirements apply:

● Drug Screening (pre-hire, pre-client onsite visits, reasonable suspicion, post-accident/incident)
● Clean driving record
● DOT medical certification (valid driver’s license required, CDL not required; we handle certification in-house)
● Criminal & Background Screening (criminal record will not necessarily prevent your eligibility for hire)
Benefits & Perks

Company
• Medical/Rx Insurance
• Dental & Vision
• 401k with Employer Match
• Life Insurance (100% Employer Paid)
• Short Term Disability (100% Employer Paid)
• 10 Paid Holidays
• Paid Time Off up to 26 days annually based on seniority (up to 13 days year 1)
• Relocation assistance available (inquire about eligibility)

Job Specific
• Boot Allowance $200/year
• Pant Allowance $290/year
• Ongoing training and certification support (e.g., EASA courses)
• Breakroom snacks & meals
• Travel opportunities
• Public transit stations near Shop (Bus Lines)

We are an Equal Employment Opportunity (“EEO”) Employer.

It has been and will continue to be a fundamental policy of Sidewinders, LLC not to discriminate on the basis of race, color, creed, religion, gender, gender identity, pregnancy, marital status, partnership status, domestic violence victim status, sexual orientation, age, national origin, alienage or citizenship status, veteran or military status, disability, medical condition, genetic information, caregiver status, unemployment status or any other characteristic prohibited by federal, state and/or local laws.

This policy applies to all aspects of employment, including hiring, promotion, demotion, compensation, training, working conditions, transfer, job assignments, benefits, layoff, and termination.

Job Title: Senior Electric Motor Winder & Mechanic

Company: American Armature Corp.

Location: 15 Fort Monroe Ind. Pkwy, Monroeville, OH 44847

Employment Type: Full-Time (In-Shop)

Experience Level: Minimum 5+ Years Required

Compensation: Competitive Pay (Based on Experience) + Generous Incentive Plan

Company Overview
American Armature Corp. is a premier industrial electromechanical sales, service, and repair center located in Monroeville, OH. We specialize in comprehensive overhaul, mechanical reconditioning, and precision rewinding for heavy industrial electric motors, pumps, and gearboxes. Our shop handles critical rotating equipment powering manufacturing, processing, and utility industries across the region.

Position Summary
We are seeking an experienced Electric Motor Winder & Mechanic with a strong core mechanical and electrical aptitude to join our in-shop repair facility. In this role, you will be responsible for disassembling, inspecting, diagnosing, rewinding, and reassembling a wide spectrum of AC/DC electric motors (up to 5,000 HP), industrial pumps, and gearboxes.

The ideal candidate possesses deep hands-on expertise in various winding techniques—including random winding, form coil, wave winding, and lap winding—and thrives in a fast-paced industrial repair shop environment.

Interested? Please forward resume to tley@americanarmaturecorp.com.

Key Responsibilities
• Winding & Coil Fabrication: Perform high-quality rewinding on stators, armatures, rotors, and field coils using random winding, form coil, wave winding, and lap winding configurations for low, medium, and high-voltage motors up to 5,000 HP.

• Stripping & Data Collection: Accurately measure, record, and document core data, wire gauges, turn counts, span, pitch, connection diagrams, and insulation class specs during tear-down.

• Mechanical Repair & Overhaul: Disassemble, overhaul, troubleshoot, and reassemble large electric motors, centrifugal and industrial pumps, and speed reducers/gearboxes.

• Testing & Quality Inspection: Conduct electrical testing including resistance, megohm, surge, hi-pot, and core loss testing prior to and following the rewind/repair process.

• Varnish & Insulation: Prepare and apply VPI (Vacuum Pressure Impregnation) or bake-and-dip insulation treatments; tie, lace, wedge, and block coils to industry standards.

• General Shop Mechanics: Perform mechanical fit checks, bearing replacements, shaft inspections, and seal installations on pumps and rotating assemblies.

Minimum Qualifications & Requirements
• Experience: Minimum 5 years of hands-on experience in electric motor rewinding and electromechanical shop repair.

• Core Technical Knowledge: Solid foundation in electrical concepts, mechanical repair principles, and data extraction for AC/DC motors (up to 5,000 HP).

• Winding Proficiency: Demonstrated mastery of random winding, form coil, wave winding, and lap winding processes.

• Equipment Knowledge: Working experience with industrial pumps (centrifugal, submersible, end-suction) and multi-stage industrial gearboxes.

• Precision Tools: Ability to read micrometers, calipers, dial indicators, surge testers, and electrical multimeters.

• Physical & Safety: Ability to handle heavy industrial components safely using overhead cranes, rigging equipment, and shop hoists.

• Application Requirement: Resume submission required for employment consideration.

Benefits & Compensation Package
At American Armature Corp., we value craft excellence and reward performance:

• Competitive Hourly / Salary Base: Commensurate with experience.

• Generous Incentive Plan: Performance and productivity incentives on top of base pay.

• Retirement Plan: Company-matched retirement savings plan to support your future.

• Paid Time Off (PTO): Accrued PTO program for work-life balance.

• Paid Vacations & Holidays: Dedicated paid vacation time and recognized annual company holidays.

• Comprehensive In-Shop Environment: Fully equipped repair facility with modern test apparatus and crane support.

Company: Jarvis Electric Motors Inc.

Location: 6001 S Crescent Boulevard, Pennsauken, NJ 08110 (Servicing South Jersey & Philadelphia Metro Area)

Employment Type: Full-Time

Compensation: Competitive salary and benefits package based on experience

Company Overview
Established in 1946, Jarvis Electric Motors Inc. is a premier electric motor repair, sales, and service shop located in Pennsauken, New Jersey. Just minutes from the Ben Franklin Bridge and Center City Philadelphia, we provide electro-mechanical solutions to school districts, hospitals, manufacturers, mechanical contractors, and residential clients throughout South Jersey and the Delaware Valley. We specialize in the repair, rewinding, and overhauling of AC/DC electric motors, industrial pumps, gear reducers, blowers, hoists, and power tools.

Position Summary
We are seeking an experienced In-Shop Electric Motor & Equipment Mechanic to join our team in Pennsauken, NJ. Working directly within our fully equipped repair shop, you will perform teardown, diagnosis, precision mechanical rebuilding, and testing on a wide range of AC/DC electric motors (up to 250HP), commercial/residential pumps, gear reducers, and industrial power tools. The ideal candidate brings strong diagnostic abilities, electro-mechanical proficiency, and pride in quality craftsmanship.

Key Responsibilities
• In-Shop Teardown & Diagnosis: Disassemble AC/DC electric motors, submersible/sump pumps, blowers, gear drives, and power tools to identify electrical failures or mechanical wear.

• Mechanical & Electrical Rebuilding: Replace bearings, mechanical seals, brushes, armatures, bushings, shafts, and end bells. Perform mechanical fit restoration and precision alignments.

• Bench Testing & Electrical Diagnostics: Conduct surge testing, insulation resistance (megger) tests, winding resistance checks, and no-load run testing using electrical diagnostic panels and multimeters.

• Equipment Assembly: Reassemble electric equipment to manufacturer specifications, ensuring proper tolerances, balance, and operational integrity prior to final inspection.

• Machining & Shop Tool Operation: Safely operate shop equipment including hydraulic presses, bearing heaters, lathes, drill presses, overhead cranes, and hand/power tools.

• Quality Assurance: Maintain clean work areas, document work performed on repair orders, and ensure all completed equipment meets shop performance standards.

Minimum Qualifications & Skills
• Experience: 3+ years of hands-on experience in an electric motor, pump, or electro-mechanical repair shop.

• Technical Skills:

o Demonstrated proficiency repairing AC motors (up to 250HP) and DC electric motors.

o Working knowledge of centrifugal, submersible, sump, and HVAC circulating pump repairs.

o Experience troubleshooting and repairing electric power tools, gear reducers, and hoists.

o Ability to read precision measuring instruments (micrometers, calipers, dial indicators) and electrical schematics.

• Physical Requirements: Ability to lift up to 50 lbs, maneuver heavy equipment using shop hoists/cranes, and work standing in a shop environment.

• Work Ethic: Reliable, detail-oriented, and focused on delivering high-quality repairs with minimal comebacks.

Compensation & Benefits
• Competitive base pay negotiable based on experience and electro-mechanical skill level.

• Comprehensive health, dental, and vision insurance coverage options.

• Paid Time Off (PTO) and paid holiday schedule.

• Retirement plan options.

• Steady, year-round indoor shop work with predictable schedule (Monday–Friday).

Interested? Please forward resume to jarvis662@verizon.net.

Job Title: Experienced Electric Motor Mechanic
Company: Hamilton Electric (3175 Pierce Rd, Saginaw, MI)
Location: Saginaw, MI (Serving the Tri-City Area & Mid-Michigan)
Employment Type: Full-Time
Compensation: Salary negotiable based on experience

Company Overview

Established in 1974, Hamilton Electric is a family-owned electric motor and equipment repair facility located in Saginaw, Michigan. We specialize in comprehensive mechanical and electrical repair, dynamic balancing, and rebuilding services for AC/DC electric motors, industrial pumps, generators, welders, variable frequency drives (VFDs), and soft-start systems for industrial, commercial, and agricultural clients throughout the Tri-City area and beyond.

Position Summary

We are seeking an experienced Electric Motor Mechanic to join our shop team in Saginaw. In this role, you will diagnose, disassemble, repair, mechanically rebuild, and test a wide variety of AC and DC electric motors, industrial pumps, and rotating equipment. The ideal candidate brings strong mechanical diagnostic capabilities, hands-on precision repair skills, and familiarity with electro-mechanical machinery.

Key Responsibilities

• Diagnostics & Teardown: Disassemble AC/DC motors, armatures, stators, and pumps; perform mechanical failure analysis and document electrical/mechanical faults.
• Mechanical Rebuilding: Fit bearings, shafts, end bells, keyways, and mechanical seals; perform precision machining or sleeve work as required.
• Electrical Testing: Conduct surges, insulation resistance (megger), winding resistance, hipot, and no-load bench testing using multimeters and diagnostic test panels.
• Assembly & Balancing: Reassemble motors and rotating equipment to manufacturer specifications; assist with dynamic balancing and laser alignment.
• Shop Equipment & Maintenance: Operate overhead cranes, hydraulic presses, bearing heaters, lathes, and shop hand tools safely and efficiently.
• Quality Control: Ensure all completed motor rebuilds meet shop quality standards and customer requirements prior to delivery.

Qualifications & Skills

• Experience: 3+ years of direct experience in an electric motor repair shop or industrial mechanical maintenance environment.
• Technical Skills:
o Proficiency in disassembling, mechanical rebuilding, and assembling AC/DC industrial motors and pumps.
o Experience reading precision measuring tools (micrometers, calipers, dial indicators).
o Understanding of basic electrical testing (surge testing, megohmmeter, winding resistance).
o Mechanical alignment, bearing installation, and shaft tolerances knowledge.
• Physical Requirements: Ability to lift up to 50 lbs, operate shop cranes/hoists, and stand for extended periods in a shop floor environment.
• Work Ethic: Strong attention to detail, commitment to quality craftsmanship, and reliable attendance.

Compensation & Benefits

• Competitive base salary based on years of experience and mechanical skill set.
• Overtime opportunities during peak industrial demand.
• Paid Time Off (PTO) and paid holiday schedule.
• Ongoing technical training and skill advancement within a long-standing family-owned company.

Interested? Please send resume to adam@hamiltonelec.com.

Job Title: In-House Electric Motor Mechanic / Technician
Company: Heights Armature Works
Location: 12250 Taylor Road, Houston, TX 77041
Job Type: Full-time (In-Shop)

Compensation: Salary based on experience

About Us
Established in 1932, Heights Armature Works is an EASA-Certified Service Center providing premier AC/DC motor, generator, and industrial pump repairs across Greater Houston. Operating out of our 12,000 sq. ft. facility, we are seeking a skilled Electric Motor Mechanic with at least 5 years of hands-on experience to handle shop repairs and rebuilds.

Key Responsibilities

• Inspect, diagnose, repair, overhaul, and test AC and DC electric motors up to 600 HP, including standard NEMA frame configurations.

• Disassemble rotating equipment, evaluate mechanical/electrical wear, measure tolerances with precision tools (micrometers, calipers, dial indicators), and log initial fault findings.

• Perform mechanical repairs including mechanical assembly, bearing replacement, shaft fitting, housing restoration, and dynamic balancing.

• Conduct electrical diagnostics, insulation resistance (Megger), surge testing, stator/armature resistance checks, and mechanical run-testing prior to final sign-off.

• Perform preventative maintenance, reconditioning, dip-and-bake insulation procedures, and complete teardown-to-assembly installations in-house.

Qualifications & Requirements

• Experience: Minimum 5 years of proven experience repairing AC/DC motors, NEMA frame equipment, and industrial rotating machinery in a motor shop environment.

• Technical Knowledge: Strong understanding of motor mechanical components, bearings, armatures, commutators, and electro-mechanical testing equipment.

• Physical Capability: Ability to safely operate overhead shop cranes (up to 15,000 lbs capacity), rigging gear, and heavy repair machinery.

• Work Ethic: Detail-oriented focus on safety, OEM standards, and quality craftsmanship.

Benefits & Compensation

• Competitive base salary commensurate with experience.

• Comprehensive health insurance plan.

• Company-matched retirement plan.

• Paid Time Off (PTO) and paid annual vacation days.

How to Apply
Qualified candidates are invited to submit their resume or stop by our Houston facility at 12250 Taylor Road. You may also reach out directly via phone at (713) 937-7676 or email bwilliams@hawtx.com.

Electrical Motor Repair Technician Job Opening:

We are a premier ISO9001:2015 CERTIFIED industrial repair and manufacturing facility. Our nation- wide customer base includes power generation, industrial manufacturing including heavy steel manufacturing, municipal and processing facilities. We offer competitive wages and benefits (Full benefit package Medical, Dental, 401K, paid vacation, and a great working environment). Overtime is available.

We are currently seeking to fill the following position: Electrical Motor Repair Technician

· Receive and interpret oral/written instructions from supervisor(s) and/or assigned personnel.

· Test electromechanical equipment to troubleshoot known or suspected problems using various methods (AC or DC).

· Disassemble and assemble electromechanical equipment noting parts identification, configuration, and condition.

· Clean electromechanical equipment assemblies as needed using various methods and steps, including but not limited to: parts washers, steamers, blasters, etc.

· Measure and inspect the parts per provided instructions and fill out proper data sheets.

· Replace or repair worn or defective mechanical or electromechanical assemblies, including but not limited to: bearings, brushes, brush holders, motor leads, gears, seals, impellers, mechanical switches, rotors, tachs, fans, end shields, etc. per provided instruction.

· Engage in retesting reassembled electromechanical equipment for proper output and operation.

· Maintain a neat and orderly work area.

· Abide by all safety/environmental regulations and use proper protective gear.

· May be assigned to field to support service work as required.

· Perform other skilled or non-skilled duties as directed by supervisor

Qualifications:

· Minimum of a High School Diploma or GED

· 2+ years of relevant electrical experience

· Good written and oral communication skills

· Self-motivated

· Ability to multi-task

· Organized and detail oriented

· Valid driver’s license required

Physical Requirements:

· Able to stand, walk, reach with hands/arms, stoop, kneel, crouch for most of the day

· Frequently lift and/or move up to 50 pounds.

· Regularly lift and/or move up to 25 pounds,

· Occasionally lift and/or move more than 100 pounds.

· Have ability for close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Desirable:

· Familiarity with computer.

· Ability to perform welding, soldering & brazing.

· Balance rotating equipment.

Pay range: Commensurate with experience, from $30-$45 per hour

Overtime:  We pay overtime for hours worked over 8 per day and any Saturday work; double time for Sunday work

Shift:  6:30am-5:00pm Monday-Saturday; some Sundays.  We guarantee 40 hours per week; overtime is currently available.

Relocation package may be considered.

INDIVIDUALS MUST HAVE EXPERIENCE WORKING WITH LARGE ELECTRIC MOTORS  

Interested? Please forward resume to – tfries@msc-hobart.com.